**Buyer is responsible for all loading and rigging and must bring sufficient help and equipment to load. NOTE: Slip resistance meets or exceeds (ASTM D 2047-11) James Machine 0.5 minimum.Vehicle DMV Dealer services provided by K-BID: DLR24714 Use air conditioners and exhaust fans where available. Allow adequate airflow for at least 24 hours after final coat is applied. Allow light traffic after 24 hours, however, it is susceptible to scuffing and marring. Abrade between coats if 24 hours has elapsed with a maroon top scrub pad or 120 grit screen. Allow to dry thoroughly (minimum 3 hours between coats depending on conditions with a maximum of 24 hours). At the end of each pass, make a smooth turn with the applicator and squeeze out excess finish with the grain next to the puddle line. With applicator at a slight angle, move the puddle line to the opposite wall, always maintaining a wet edge. Pour a 4-inch wide line of finish along one wall with the grain of the wood. Pour finish into a clean, dry, plastic pour can. Mix thoroughly and let stand for 10 minutes. Screen using new 100 or 120 grit screens or higher, vacuum and tack using a water moistened cotton towel.ĪPPLICATION: While stirring product, add catalyst slowly and continue mixing for 30 seconds. or 250 mL/L (1:4) with water and tack using a clean towel. Apply water-based wood sealer following instructions on sealer label: 2 coats minimum.įOR SCREENING AND RECOATING: Always clean the floor prior to screening. Vacuum all dust and tack with cotton towel.

PREPARATION: FOR NEW OR SANDED FLOORS: Prepare the floor using accepted NWFA or MFMA procedures. Packaged: Single 18.9L Pail with Catalyst Also, the clear finish lets the natural beauty of the wood shine through. Durable, fast-drying and low VOCs, HP Gym Coat provides high gloss and extended durability. HP Gym Coat is specifically designed for sports floors combining innovative floor coating technology at a great value.

Betco hp gym coat price gallon